T-3 1/4 Bayonet Based Lamps Designed for GE ET-16 Sockets
- Replaces 1835 and 1819 incandescent bulbs
- For GE ET-16 Socket
- No modification to series resistor required
- Built-in shunt resistor to clamp noise current
- Bi-polar
- High-intensity
- Up to 100,000-hour life
- Shock and vibration resistant
The PowerLine® 1835LS and 1819LS2 series LED lamps are designed specifically for the GE ET-16 socket. Several models are available to operate with industry-standard voltages and series resistor combinations.
ET-16 socket not included
To select a PowerLine® LED lamp:
- Identify your input voltage and series resistor from the chart below. Series resistor values are usually marked on the ceramic case at the back of the socket
- Select the appropriate PowerLine® LED part number
- Replace "X-CX" in the part number with the color code (see LED color code chart below)
| INPUT VOLTAGE | SERIES RESISTOR | MAXIMUM VOLTAGE | PowerLine® LED PART # |
 |
| 24DC | 10Ω | 28 | 1819S2-X-CX | |
| 48DC | 200Ω | 56 | 1835S2-X-CX | |
|
100-140DC 250DC 70AC 120AC 125AC 240AC |
2KΩ 5.1KΩ 750Ω 1.9KΩ 2.7KΩ 4.8KΩ |
140 280 76 130 140 260 |
1835S3-X-CX | |
| 100-140DC | 5.1KΩ | 140 | 1835S9-X-CX | |
| 125DC | Dim/Bright | 140 | 1835S4-X-CX | |
| 48DC | Dim/Bright | 52 | 1835S6-X-CX |
| LED COLOR CODE | EMITTED COLOR | Used to illuminate the following lenses | ||||||
| Red | Amber | Yellow | Green | Blue | White | Clear | ||
| -R-CR | Red | * | * | * | ||||
| -A-CA | Amber | * | * | * | * | |||
| -G-CG | Green | * | * | * | ||||
| -B-CB | Blue | * | * | * | ||||
| -W-CW | White | * | * | |||||
